微波条件下杂原子MCM-41介孔分子筛的合成  

Synthesis of hetero-atom MCM-41 mesoporous molecular sieve under microwave condition

作　　者：姜廷顺[1] 殷广明[2] 赵谦[1] 殷恒波[1] 唐雅静[1] 

机构地区：[1]江苏大学化学化工学院,镇江212013 [2]齐齐哈尔大学化学化工学院,齐齐哈尔161006

出　　处：《中国有色金属学报》2007年第8期1391-1395,共5页The Chinese Journal of Nonferrous Metals

基　　金：江苏省高校自然科学基金资助项目(04KJD130040);江苏大学高级人才基金资助项目(06JDG074)

摘　　要：以十六烷基三甲基溴化铵(CTAB)为模板剂,硅酸钠、氯化镍、氯化钴和氯化铜为原料,通过微波辐射法合成纯硅MCM-41和Ni(Co、Cu)MCM-41介孔分子筛。采用X射线衍射、透射电子显微镜、Fourier变换红外光谱和比表面积孔径分析等测试手段对所合成的介孔分子筛进行表征。考察了分别将杂原子Ni、Co和Cu引入MCM-41介孔分子筛对其介孔有序性、比表面积及孔径大小的影响。结果表明:在微波条件下可以合成出纯硅MCM-41和掺杂Ni(Co、Cu)MCM-41介孔分子筛,样品经550℃焙烧后模板剂被有效去除,合成样品的介孔结构没有被破坏;杂原子Ni(或Co、Cu)引入纯硅MCM-41介孔分子筛后,其比表面积和平均孔径均增大,且介孔有序性变好。Silica MCM-41 and Ni （Co or Cu） MCM-41 mesoporous molecular sieve were synthesized by microwave irradiation method using cetyltrimethyl ammonium bromide as template and sodium silicate, nickel chloride, cobalt chloride and cooper chloride as raw materials, respectively. The synthesized samples were characterized by X-ray diffractometry, transmission electron microscopy, specific surface area analysis, Fourier transform infrared spectroscopy and N2 physical adsorption. After hetero-atom （Ni, Co or Cu） was introduced into silica MCM-41 mesoporous molecular sieve, the effects of hetero-atom （Ni, Co or Cu） on its investigated. The results show that silica MCM-41 specific surface area, mesoporous ordering and pore size were also and Ni （Co or Cu） MCM-41 mesoporous molecular sieves are synthesized. The template is effectively removed from the samples after calcinations at 550 ℃, and the pore structure of the synthesized samples is not damaged. After hetero-atom Ni （Co or Cu） is introduced into silica MCM-41 mesoporous molecular sieve, its specific surface area and average pore size increase and mesoporous order becomes good.

关 键 词：介孔分子筛 微波合成 表征 比表面积 

分 类 号：O643[理学—物理化学]