转炉炼钢厂工序产能和品种钢铸机配置  

Matching of productive capacity among working procedures and allocating of continuous casting machines for quality steel in a converter plant

作　　者：刘青[1] 尹佳[1] 田新中 胡黎宁 

机构地区：[1]北京科技大学冶金与生态工程学院,北京100083 [2]邢台钢铁有限责任公司技术中心,邢台054027

出　　处：《北京科技大学学报》2007年第8期845-849,共5页Journal of University of Science and Technology Beijing

摘　　要：以邢钢转炉炼钢厂生产运行研究为基础,从物质量基本参数角度,对转炉、LF、连铸机三者的工序产能进行匹配分析和综合研究.运用OPT技术分析得出连铸机是原流程协调运行的"瓶颈",通过对提升连铸机生产能力的三种方法的分析,提出将连铸机由4流增加至5流是适合邢钢工艺的最佳工序产能匹配方案.最后,对中小吨位转炉流程的转炉、LF和连铸机匹配模式进行探讨,认为三者"一一对应"匹配模式是可行的.On the basis of the production run research of a BOF steelmaking workshop, the matching analysis and comprehensive research of productive capacity among BOFs, LFs and CCMs were carried out from the aspect of basic mass flow parameters. Applying OPT technology to this study, the bottleneck of coordinating operation for the previous process was the continuous casting machine （CCM）, which was determined through analyzing three ways to enhance productive capacity. The optimized scheme of productive capacity matching for different working procedures was put forward, which was the strands of CCM increased from 4 to 5 in the former process of the steelmaking plant. At last, the matching mode of converters, LFs and CCMs in the medium and small size BOF process was discussed, and the matching mode of one BOF-one LF-one CCM is feasible on some condition.

关 键 词：钢铁冶金过程工程 转炉炼钢厂 生产模式 过程优化 

分 类 号：TF758[冶金工程—钢铁冶金] TF769.2