先驱体作粘结剂低温制备SiC多孔陶瓷  

Low-Temperature Fabrication and Characterization of Porous SiC Ceramics Using Preceramic Polymer as Binder

作　　者：马彦[1] 马青松[1] 陈朝辉[1] 

机构地区：[1]国防科技大学新型陶瓷纤维及复合材料国防科技重点实验室,湖南长沙410073

出　　处：《稀有金属材料与工程》2007年第A01期531-533,共3页Rare Metal Materials and Engineering

基　　金：武器装备预研基金项目(51488030104BQ0101)

摘　　要：分别以聚碳硅烷和硅树脂作粘结剂,SiC微粉作骨料,在惰性气氛中1000℃下低温制备出SiC多孔陶瓷,所得样品的气孔率在43%～52%之间,抗断裂强度最高达到了18.59MPa,而且样品的孔径呈单峰分布。分析比较了由这2种不同粘结剂制备的SiC多孔陶瓷性能。Porous SiC ceramics were fabricated from SiC powders, polycarbosilane（PCS） and silicone resin（SR） at low temperature of 1000 ℃ in inert atmosphere, in which PCS and SR were respectively used as binder. Open porosity of the as-fabricated SiC ceramics arranges from 43% to 52%, the fracture strength is as high as 18.59 MPa, and the pore size distribution has characteristics of single-peak. Properties of the two kinds of porous SiC ceramics using PCS and SR as binder respectively were analyzed and compared.

关 键 词：聚碳硅烷 硅树脂 SIC多孔陶瓷 孔结构 渗透率 

分 类 号：TQ174.6[化学工程—陶瓷工业]