差压式流量传感器的数值模拟与优化设计  

Numerical Simulation and Optimazition Design for Cone Differential Pressure Flowsensor

作　　者：徐英[1] 杨会峰[1] 吴经纬[1] 李刚[1] 王化祥[1] 

机构地区：[1]天津大学电气与自动化工程学院,天津300072

出　　处：《微纳电子技术》2007年第7期3-6,共4页Micronanoelectronic Technology

基　　金：863计划资助项目(2006AA04Z167)

摘　　要：利用RNGk-ε模型对100mm口径锥体差压式流量传感器进行了CFD数值模拟实验,其等效直径比β值分别为0.50,0.65,0.85,前锥角分别为40°,45°,50°,后锥角分别为120°,130°,140°,共27种锥体组合。实验结果表明:β值越大,流出系数越小,且流出系数更易受雷诺数的影响;β值相同时,前锥角对流出系数具有较大影响,且较大的前锥角可减弱雷诺数对流出系数的影响;后锥角对流出系数的线性度具有一定程度的影响。Computational fluid dynamics （CFD） numerical simulation tests for cone differential flowsensors with diameter of 100 mm were carried out by RNG/k-ε turbulence model,and the values of equivalent diameter ratio/9, are 0. 50, 0. 65, 0. 85 respectively, overall 27 sorts of combinations were done,the fore V-cone angle are 40°, 45°, 50°respectively, the aft V-cone angle are 120°, 130°, 140°respectively. The simulation results show that the discharge coefficient increases while the β is decreased, and it is influenced more easily by Reynolds number while the β is increased. If the β keeps the same value, the fore cone angle is crucial. Larger fore cone angle will weaken the influence of the Reynolds number.

关 键 词：锥体差压式流量传感器 数值模拟 流出系数 等效直径比 前后锥角 

分 类 号：TH814.5[机械工程—仪器科学与技术]