B/A法强化处理印染废水工艺条件研究  

Study on forced treatment of printing and dyeing wastewater by the B/A method

作　　者：黎松强[1] 林穗云[1] 吴馥萍[1] 

机构地区：[1]嘉应学院化学系,梅州514015

出　　处：《环境工程学报》2007年第9期90-93,共4页Chinese Journal of Environmental Engineering

基　　金：广东省教育厅自然科学研究项目(200053)

摘　　要：采用B/A法对印染废水处理工艺条件控制进行系列试验。探索了微生物种群与有机污染物降解率的关系。获得了提高水质达标率的数据:COD<90 mg/L,BOD5<20 mg/L,挥发酚<0.5 mg/L,石油类<0.5 mg/L,NH3-N<15 mg/L;CN-<0.5 mg/L,S2-<1 mg/L,pH在6～9范围内,筛选优化B/A法处理印染废水的工艺设计。A series of experiments on technological control conditions in printing and dyeng wastewater treatment with B/A method were carried out. The relation between microorganism species groups and degradation rates of organic pollutants was explored. The following data for improving water quality were obtained： COD 〈90 mg/L;BOD5 〈20 mg/L;volatile phenol〈0.5 mg/L;petroleum 〈0.5 mg/L; NH3^-N 〈15 mg/L;CN^- 〈 0.5 mg/L; S^2- 〈 1 mg/L; pH = 6 - 9. They provide the experimental basis for the improvement of printing and dyeing wastewater treatment techniques.

关 键 词：B/A法 处理 印染 废水 工艺控制 

分 类 号：X703.1[环境科学与工程—环境工程]