乳液法制备微米级硅气凝胶小球及其表征  

Preparation and Characterization of Microscaled Silica Areogel Balls by Emulsion Method

作　　者：刘明贤[1] 庞颖聪[1] 甘礼华[1] 王曦[1] 徐子颉[1] 陈龙武[1] 

机构地区：[1]同济大学化学系,上海200092

出　　处：《原子能科学技术》2007年第5期550-554,共5页Atomic Energy Science and Technology

基　　金：国家自然科学基金资助项目(20473057);上海市科技发展基金资助项目(0352nm094)

摘　　要：以硅溶胶为前驱物,在以吐温85和司班80为乳化剂、正丁醇为乳化助剂、正庚烷为分散介质的油相和二氧化硅醇溶胶为水相的乳液体系中,应用乳液成球技术制备μm级硅凝胶小球,然后通过常压干燥技术制备μm级硅气凝胶小球。用光学显微镜、SEM、TG-DTA及BET技术等对其进行表征。结果表明:所得μm级硅气凝胶小球表观粒径约为130μm,密度约为360kg·m^(-3),比表面积为382.5m^2·g^(-1)平均孔径约为17nm,孔隙率达83.6%。μm级硅气凝胶小球是由大小约为10nm的二氧化硅纳米微粒构成的轻质纳米多孔结构材料。Using silica sols as precursors, silica alcogel balls were prepared in the W/O emulsion composed of oil phase of Span80 and Tween85 as surfactants, n-butanol as cosurfactant, n-heptane as disperse medium, and aqueous phase of silica alcosols. In order to produce microscaled silica areogel balls, the silica alcogel balls were dried at ambient pressure. The resultant aerogel microballs were characterized by optical microscopy, SEM, TG-DTA and BET technique. The results show that the prepared silica aerogel microsballs which consist of silica nanoparticles of 10 nm are a novel kind of nanoporous structural materials with the porosity of 83.6%. They have a narrow pore size distribution in the range of 2-32 nm with an average value of 17 nm. The apparent density and specific surface area of microsballs are about 360 kg · m^-3 and 382. 5 m^2 · g^-1, respectively.

关 键 词：μm级硅气凝胶小球 纳米多孔材料 制备 乳液法 

分 类 号：TF125.6[冶金工程—粉末冶金]