标定方法应用于LAMOST光纤定位单元的跑合测试  

The method of calibration apply for the running-in measurement of LAMOST fiber positioning unit

作　　者：邬林通[1] 刘志刚[1] 胡红专[1] 李为民[1] 邢晓正[1] 

机构地区：[1]中国科学技术大学精密机械与精密仪器系,合肥230027

出　　处：《现代制造工程》2007年第9期100-102,共3页Modern Manufacturing Engineering

摘　　要：LAMOST光纤定位单元的跑合测试,是对定位单元进行原始角度误差测量、参数测量及单元位置检测等,其中单元中心轴和偏心轴角度误差测量及补偿修正是保证定位单元准确定位的关键。提出的标定方法建立了中心轴、偏心轴的运转脉冲数与中心轴、偏心轴实际转角的关系,使标定后的单元角度误差控制在±0.1°,提高了定位精度。The running-in measurement of LAMOST fiber positioning unit consists of original angle error, unit parameter and positioning precision etc. The measurement and repair of center shaft and eccentric shaft angle error are essential for unit positioning precision. The relationships of running pulse and running angle of center shaft and eccentric shaft are introduced. After calibration,the angle errors in control in the range of ±0.1° and positioning precision has been greatly improved.

关 键 词：大天区面积多目标光纤光谱望远镜 标定 光纤定位单元 角度误差 定位精度 

分 类 号：TB22[天文地球—大地测量学与测量工程]