镍磷非晶纳米晶复合镀层的制备及其耐蚀性  

Preparation and corrosion resistance of Ni-P amorphous-nanocrystalline composite coatings

作　　者：王玉[1] 郭金彪[1] 俞宏英[1] 李辉勤[1] 孙冬柏[1] 

机构地区：[1]北京科技大学腐蚀防护中心,北京100083

出　　处：《中国有色金属学报》2007年第9期1481-1485,共5页The Chinese Journal of Nonferrous Metals

基　　金：国家高技术研究发展计划资助项目(2002AA331080);北京市教委科技发展计划重点项目基金资助项目(KZ200410028012)

摘　　要：对电沉积12.3%P(质量分数)镍磷合金进行热处理,部分晶化获得非晶纳米晶复合镀层。利用X射线衍射仪、透射电镜和高分辨透射电镜分析镀层的结构。结果表明,镀态时镀层呈典型的非晶态结构,控制热处理工艺可得到非晶纳米晶的复合镀层。通过动电位极化曲线(3.5%NaCl溶液)测定,得知部分晶化的镀层耐蚀性得到改善。由于具有少量纳米晶相镶嵌于连续非晶相上,非晶纳米晶复合结构的镍磷合金镀层耐蚀性优于非晶态镍磷合金镀层。Amorphous-nanocrystalline composite coatings were prepared by annealing electrodeposited Ni-P alloy with 12.3%P （mass fraction）. The structure of coatings is studied using X-ray diffractrometry, transmitted electron microscope and high resolution transmission electron microscope. The results show that the as-plated coating exhibits a rounded-mound topography and has an amorphous structure. Through the potentiodynamic polarization curves, the corrosion data of the coatings are obtained. The corrosion resistance of the partially crystallized coatings is improved. The corrosion resistance of partially crystallized coatings is better than that of Ni-P amorphous alloy, due to a small quantity of nanoscale crystals embedded in amorphous matrix.

关 键 词：非晶纳米晶 复合镀层 电沉积 耐蚀性 

分 类 号：TQ153.2[化学工程—电化学工业]