有机玻璃深孔加工用钻头的选用及刃磨的分析研究  

The Quality Analysis and Research of Deep- hole Drilling for Organic Glass

作　　者：陈开君[1] 王增强[1] 刘耀东 

机构地区：[1]陕西工业职业技术学院,陕西咸阳712000 [2]维美德西安造纸机械有限公司,陕西西安710086

出　　处：《陕西工业职业技术学院学报》2007年第1期16-19,共4页Journal of Shaanxi Polytechnic Institute

摘　　要：有机玻璃深孔加工因冷却和排屑问题，导致加工效率低、孔的加工质量达不到技术要求。经分析研究，把钻头改为大螺旋角钻头，并对其进行合理的刃磨，圆满解决了其钻孔质量和效率问题。The deep-hole drilling technology for organic glass has a low efficiency and the process quality of bore which can＇ t satisfy the technical requirements because of chip removal and cooling. Analysis and research show, the problems of the unsatisfied bore process quality and low-efficiency can be solved satisfactorily by using drill bits with big spiral angle and adopting a proper grinding method.

关 键 词：有机玻璃 深孔钻削 大螺旋角钻头 钻头刃磨 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]