喷气织机高频电磁阀的动态设计  

The Dynamic Design of the Solenoid Valve with High Frequency on the Air-jet Loom

作　　者：王益轩[1] 

机构地区：[1]西安工程大学机电工程学院,西安710048

出　　处：《纺织器材》2007年第5期12-14,共3页Textile Accessories

基　　金：陕西省科技攻关项目(2002K12-J10)

摘　　要：根据经验公式确定了高频电磁阀线圈参数的初值,建立了高频电磁阀系统的机电耦联动力学模型,并在MATLAB平台上进行了仿真分析与动态设计,获得了最佳参数。在ANSYS平台上建立了静态和动态磁场参数化动态仿真模型,模拟电磁力,并进行了设计研究和优化分析,获得了最佳参数,两个平台上的仿真结果基本一致,据此可进行结构设计。The initial value of the coil specification of the solenoid valve with high frequency is dependent upon the experience formula. The mechatronic coupling model is established for the solenoid valve with high frequency. The simulation analysis and dynamic design are made with MATLAB, hence coil specification optimized. The dynamic simulation model of static and dynamic solenoid specification is established with ANASYS software for design research and optimized analysis. The simulated results with the two softwares are nearly the same,thus structural design can be done.

关 键 词：喷气织机 高频电磁阀 动力学模型 动态仿真 动态设计 

分 类 号：TS103.337.11[轻工技术与工程—纺织工程]