SrTiO_3微纳米线的制备与亲疏水性  

Preparation of SrTiO_3 Submicro/Nanowires and its Wettability

作　　者：唐茂玉[1] 嵇天浩[1] 刘冠娆[1] 谢健[1] 常怀秋[1] 王钦[1] 杨青林[1] 

机构地区：[1]北京航空航天大学材料科学与工程学院应用化学系,北京100083

出　　处：《稀有金属材料与工程》2007年第A02期254-256,共3页Rare Metal Materials and Engineering

基　　金：国家自然科学基金(20473007)资助

摘　　要：采用水热法,使用层状钛酸盐纳米线和氢氧化锶作为前驱物,在一定反应温度和反应时间的条件下简单地制备出了超细SrTiO_3粉体。结果表明,只有在反应条件和反应物配比合适时才能得到纯的SrTiO_3粉体。用X-射线粉末衍射仪和扫描电镜对SrTiO_3粉体进行了表征。结果表明,所制备的SrTiO_3粉体绝大部分为线状,长度约20μm,直径100～500 nm。用接触角仪对所制备的SrTiO_3粉体的亲疏水性进行了研究。结果表明,随着反应时间的延长,反应产物SrTiO_3的纯度逐渐增加,由原来的完全亲水性转变为疏水性,接触角为36.82°。SrTiO3 submicro/nanowires can be prepared using layered titanate nanowires and Sr（OH）2 as precursors at certain reaction temperature and for certain reaction time by hydrothermal method. X-ray diffraction （XRD） and scanning electron microscopy （SEM） measurements were used to investigate the phases and morphologies of prepared products. The results show that pure SrTiO3 submicro/nanowires in the diameter range of 100-500 nm can be synthesized at reaction temperature 180℃ and for reaction time 48 h. Also the measurement result using contact angle instrument demonstrates that the SrTiO3 submicro/nanowire film shows part hydrophobility.

关 键 词：水热法 微纳米线 钛酸锶 亲疏水性 

分 类 号：TB383.1[一般工业技术—材料科学与工程]