超高射频武器系统的设计与分析  

Design and Investigation of Hyper Firing-rate Gun

作　　者：季新源[1] 袁亚雄[1] 张小兵[1] 邹瑞荣[1] 杨均匀[1] 申越[2] 

机构地区：[1]南京理工大学 [2]中国兵器科学研究院,北京100089

出　　处：《兵工学报》2007年第8期1021-1024,共4页Acta Armamentarii

基　　金：教育部新世纪优秀人才计划资助

摘　　要：基于串联预装填发射原理,给出了超高射频发射系统设计,就弹丸结构、装药结构和控制方法进行详细讨论。针对超高射频的特点设计了系统实验方案,按照不同的射频进行了多发弹丸连续射击,电子点火控制系统可以实现60000 r/min的点火,全系统射频达到30000 r/min,测试了点火脉冲及其频率、弹丸膛口速度、实际射击频率以及膛内压力变化曲线,并对实验结果进行分析讨论。实验验证了超高射频发射系统设计的合理性。A prototype of hyper-firing-rate gun was designed based on the launching principle of preloading stacked projectiles. The chamber structure, projectile structure and electronic control unit were discussed in detail. Based on the characteristics of the hyper-firing-rate gun, a scheme of experimental system was put forward. The multi-projectiles firing experiments were conducted with the variable firing-rate. The igniting impulse and its frequency, muzzle velocity of projectile, actual firing-rate and p - t curves of several points in chamber were measured. The frequency of igniting impulse can reach 60 000 rounds per minute and the maximum firing-rate is up to 30 000 rounds per minute. The experimental results show that this design can attain the technical requirements.

关 键 词：机械设计 火炮 超高射频武器 内弹道 测试 

分 类 号：TJ012.1[兵器科学与技术—兵器发射理论与技术] TJ306.1