带有快速启动的高精密低噪声CMOS带隙基准  

High-Precision Low-Noise CMOS Bandgap Reference with a Fast Start-up Circuit

作　　者：张强[1] 陈贵灿[2] 田泽[1] 王进军[1] 李攀[1] 

机构地区：[1]西北大学信息学院,陕西西安710127 [2]西安交通大学微电子研究所,陕西西安710049

出　　处：《现代电子技术》2007年第20期150-153,共4页Modern Electronics Technique

基　　金：陕西省科技攻关项目(2004k05-G11);美国应用材料创新基金资助项目(ZX05097-XA-AM-200514)

摘　　要：提出了一种新颖的带有快速启动的高精密、低噪声CMOS带隙基准电压源。RC滤波电路的引入降低了基准在高频处的噪声、增加了输出基准的电源抑制比,快速启动电路的引入改善了RC滤波电路限制基准启动速度的问题,并且为了使基准在电源上电的过程中能够正常的工作而增加了软启动电路。采用UMC 0.6μm 2P2M标准CMOS工艺进行设计和仿真,HSpice模拟表明基准具有较高的精度和较低的噪声,电源抑制比PSRR约为-80 dB。此外,由于快速启动电路的存在使得基准的建立时间从20 ms降至70μs。This paper proposes a novel high - precision low - noise CMOS bandgap voltage reference which with a fast start - up circuit. Reducing the noise at the high frequency and increasing the PSRR by adding a RC filter circuit,what＇s more,a fast start - up circuit is suggested here to overcome the slow start - up problem of other designs. In order to make the bandgap reference work correctly during power supply setup time a soft start - up circuit is introduced. Using 0.6 μm 2P2M standard CMOS process of UMC this bandgap reference is designed and simulated, HSPICE simulation results indicate that this reference has higher precision and lower noise and the PSRR is about --80 dB. In addition,the setup time of the reference has been reduced from 20 ms to 70μs which benefits from the fast start - up circuit.

关 键 词：CMOS 带隙基准 低噪声 电源抑制比 软启动电路 快速启动电路 

分 类 号：TN432[电子电信—微电子学与固体电子学]