曲面EBG结构带隙特性的研究  

Study of Band-gap Characteristics for Curved Surface EBG Structures

作　　者：刘涛[1] 曹祥玉[1] 殷兆伟[1] 张广[1] 

机构地区：[1]空军工程大学电讯工程学院,西安710077

出　　处：《微波学报》2007年第5期44-47,共4页Journal of Microwaves

基　　金：国家自然科学基金(60671001);陕西省自然科学基础研究计划(2005F21);西安市工业攻关项目(GG06020);空军工程大学电讯工程学院博士创新基金编号(200603)资助

摘　　要：利用光学B ragg反射条件,设计了一种曲面电磁带隙结构。采用悬置微带线法,分析了其结构参数以及圆柱结构参数对带隙特性的影响。结果表明,结构参数对表面波带隙影响的规律与平面上一致,圆柱曲率对表面波带隙的影响不是太大,只是带隙中心频率略有下降。这一结论对在曲面共形天线上应用电磁带隙结构提高天线性能有重要的指导意义。According to the reflection condition of optics Bragg, a curved surface EBG structures is designed. Using the suspending microstrip method, the effect of EBG structure parameters and cylindrical structure parareeters on band-gap characteristics are analyzed for the first time. The results show that the effect of structrue parameters on surfaces wave band- gap is in agreement with the effect of planar structure parameters, the effect of curnature on surface wave band-gap is lesser, and the center frequency of band-gap has a little decrease. These conclusions have some certain important guided significance to apply EBG to curved surface conformal antennas in order to improve the performance of antenna.

关 键 词：曲面 电磁带隙 带隙特性 结构参数 

分 类 号：TM271[一般工业技术—材料科学与工程]