虚拟咬合运动初步仿真模拟的研究与实现  

Research and Implement of the Primary Motion Simulation Based on Virtual Articulator

作　　者：戴宁[1] 周永耀[2] 廖文和[1] 程筱胜[1] 俞青[3] 

机构地区：[1]南京航空航天大学机电学院,357信箱南京210016 [2]苏州六六视觉科技股份有限公司,苏州215005 [3]南京市口腔医院修复科,南京210008

出　　处：《生物医学工程学杂志》2007年第5期1073-1078,共6页Journal of Biomedical Engineering

基　　金：国家(863计划)资助项目(2005AA420240);江苏省科技攻关项目资助(BE2005014);南京市科技发展计划项目资助(200504022);南京市医学科技发展计划项目资助(ZKX0420)

摘　　要：我们试验了利用VR技术进行虚拟咬合仿真制作的全部过程。首先,采用光学三维测量仪对上下颌石膏模型进行数字化,通过预处理获取有效的三角网格曲面模型;其次,对咬合运动模型进行合理的简化,分解为一系列的平移运动和旋转运动;通过动态刷新完成开闭口运动、侧移运动的计算机运动仿真,可视化地观察咬合运动;然后利用模型碰撞检测算法动态地计算咬合接触位,并详细地分析了咬合接触时的咬合点位置分布和咬合剖切面上的咬合点接触关系;最后讨论了目前虚拟咬合仿真存在的问题和今后研究的方向。This paper presents our work on the research process of virtual articulator simulation. Firstly, plaster models of upper jaw and low jaw are measured by 3D-optlcal measuring system and processed to get the available data. Secondly, complex physical modeling of the jaw motion is simplified and decomposed to a series of position transform, such as translation, rotation, etc.. Thirdly, opening/closing movement and laterotrusion is simulated by real-time updating display. Fourthly, the efficient collision detection algorithm is applied to dynamically compute occlusal contact regions and cutaway view. Finally, the current shortage of the virtual articulator simulation is discussed in detail and research prospect is forecasted.

关 键 词：虚拟牙合架 牙合架运动仿真 咬合接触 碰撞检测 

分 类 号：R319[医药卫生—基础医学]