检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]吐哈油田分公司勘探开发研究院,新疆哈密839009
出 处:《断块油气田》2007年第5期51-52,共2页Fault-Block Oil & Gas Field
摘 要:雁木西油田第三系油藏水驱控制程度和水驱动用程度均比较好,但由于注水结构不合理导致注水利用率低、平面水驱状况不均衡。根据第三系油藏存在问题,确定了考虑气体亏空时的平衡注采比和不同注采比下的地层压力恢复速度,并进一步确定不同井组合理的注采比范围,制定了下步技术对策,为油田注采调整、挖掘剩余油指明方向。The study of this subject shows that control degree and producing degree of waterflood are better,but affusion utilizing ratio is low and planar water-flooding status is disproportion because of inconsequential injection structure.Production of some oil wells is better because of good water-flooding status and production of some oil wells is descending because of inconsequential working system.According to the problems of Tertiary reservoirs,the balanceable injection production ratio and pressure comeback rate are made certain using the related formulas,and the range of reasonable injection-production ratio is established in each injection compages.Next technology countermeasure and adjusting direction are put forward according to Tertiary reservoirs,which designate the direction of empoldering remaining oil and adjusting structure of injection-production.
关 键 词:水驱控制程度 水驱动用程度 平衡注采比 注水利用率 注采结构
分 类 号:TE358.1[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222