检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:包南[1] 张锋[1] 马志会[1] 刘鑫[1] 孙剑[1] 刘峰[1]
机构地区:[1]山东大学环境科学与工程学院,山东济南250100
出 处:《化工环保》2007年第3期204-208,共5页Environmental Protection of Chemical Industry
基 金:国家863计划资助项目(2003AA601060);山东大学校青年基金项目(11440053187025)
摘 要:采用溶胶-凝胶和水蒸气活化热处理技术制备了介孔TiO2纤维,考察了各种因素对介孔TiO2纤维光催化活性的影响,并对介孔TiO2纤维结构进行了表征。介孔TiO2纤维的最佳制备条件:n(TBOT)∶n(C6H10O3)∶n(H2O)∶n(C3H8O)=1∶0.4∶2.0∶16,搅拌时间80min,Si与Ti的摩尔比为0.15,采用分段程序升温工艺,活化温度为700℃。所得介孔TiO2纤维比表面积为127.7m2/g,最可几孔径为7.3nm,具有极高的热稳定性及抗晶型转变能力,反应时间75min时活性艳红X-3B降解率为99.3%。Mesoporous TiO2 fiber was prepared by sol-gel and thermal activation process with vapor. The factors affecting the photocatalytic activity of mesoporous TiO2 fiber were studied. And the structure of mesoporous TiO2 fiber was characterized. The optimum conditions for mesoporous TiO2 fiber preparation are as follows: n(TBOT) : n(C6H10O3) : n(H20) : n(C3H8O) =1:0.4: 2.0: 16, stirring time 80 min, mol ratio of Si to Ti 0. 15, activation in stage programmed temperature process, activation temperature 700 ℃. The BET specific surface area of the mesoporous TiO2 fiber is 127.7 mE/g and the most probable pore diameter is 7.3 nm. The material has extremely high thermal stability and resistant capability to crystalline form transformation. When the reaction time is 75 min, the degradation rate of reactive brilliant red X-3B is 99.3%.
关 键 词:介孔材料 二氧化钛 纤维 光催化 活化 活性艳红 降解
分 类 号:X703[环境科学与工程—环境工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198