悬线式物镜力矩器动态特性的仿真实验研究  

Emulation experiments study on the dynamic performance of wire suspension type lens actuator

作　　者：张布卿[1] 马建设[1] 潘龙法[1] 齐国生[1] 汝继刚[1] 史洪伟[1] 

机构地区：[1]清华大学光盘国家工程研究中心,北京100084

出　　处：《光学技术》2007年第6期803-806,共4页Optical Technique

基　　金：信息产业部电子发展基金资助项目(信部运[2004]406)

摘　　要：悬线式物镜力矩器是目前光学头系统中使用最为广泛的力矩器,其动态特性直接决定了光学头的读写性能。基于ANSYS参数化设计语言(APDL)建立了悬线式光学头物镜力矩器的仿真设计平台。通过仿真平台进行了力矩器一阶共振频率和峰值、二阶共振频率和峰值、扭转共振频率、静态灵敏度、动态灵敏度和相位等动态特性参数的仿真实验,仿真计算的结果与实际测量的结果相比,最大相对误差为4.2%。该仿真平台对于二维乃至三维悬线式物镜力矩器的设计和评价都具有重要的指导意义。Wire suspension type lens actuator is the most popular actuator used in the optical pickup system, and its dynam- ic performance determines the read/write property directly. The emulation platform of the wire suspension type optical pickup actuator is established with the ANSYS parametrical design language （APDL）. The first resonance frequency and the peak val- ue, the second resonance frequency and the peak value, the rolling frequency, the IX： sensitivity as well as the AC sensitivity and the phase parameters are analyzed and calculated based on the platform. Compared with the result of the practical test, the maximum relative error is 4.2 %. The design platform has very important guide meaning for the two dimensions or three di- mensions lens actuator＇s design and evaluation.

关 键 词：光学头 物镜力矩器 APDL 电磁场 仿真 

分 类 号：TP333.4[自动化与计算机技术—计算机系统结构]