制备条件对NiFe_2O_4粉末合成的影响  

Effect of Preparing Conditions on Fabrication of NiFe_2O_4 Spinel Powder

作　　者：李智[1] 冯旺军[1] 蒲忠胜[1] 李扬[1] 文宏 

机构地区：[1]兰州理工大学理学院,甘肃兰州730050 [2]甘肃省机械工业学校科研开发中心,甘肃天水741001

出　　处：《甘肃科学学报》2007年第4期34-36,共3页Journal of Gansu Sciences

基　　金：甘肃省自然科学基金项目(ZS032-B25-019)

摘　　要：通过固相反应,制备了NiFe2O4陶瓷粉末.经XRD分析,由产物的衍射线位置和强度对比,得出烧结温度与保温时间对NiFe2O4陶瓷粉末的合成有重要影响.结果表明:当恒温时间为2 h时,随着烧结温度从973 K升高到1 423 K,NiFe2O4粉末的质量百分含量从35.85%增至99.97%.当烧结温度为1 273 K时,随着恒温时间从2 h延长至6 h,NiFe2O4粉末的质量百分含量从75.8%增至99.91%.提出了适当的延长保温时间和提高烧结温度对NiFe2O4陶瓷粉末的合成非常有利.NiFe2O4 spinel power was fabricated in the solid state reaction. Analysing it with power X-ray diffraction（XRD） and comparing it in diffraction location and intensity, we confirmed that the production of NiFe2O4 spinel power was affected by constant temperature time and sintering temperature observably. The results indicated that with sintering temperature arising from 973K to 1 423K, the molar percent of NiFe2O4 spinel power got higher from 35.85 to 99.97 when constant temperature time was 2h. Furthermore,the molar percent of NiFe2O4 spinel power rose from 75.8 to 99.91 with constant temperature time from 2h to 6h when sintering temperature was 1 273K. The research showed that it was favorable to synthesize NiFe2O4 spinel power with a prolonged constant temperature time and a higher sintering temperature.

关 键 词：NIFE2O4 XRD 烧结温度 恒温时间 

分 类 号：TB321[一般工业技术—材料科学与工程]