近β型钛合金Ti3Zr2Sn3Mo15Nb的形状记忆效应和超弹性研究  

Shape memory effect and superelastic properties of novel Ti-3Zr-2Sn-3Mo-15Nb alloy

作　　者：于振涛[1] 郑玉峰[2] 牛金龙[1] 王本力 皇甫强[1] 张亚峰[1] 麻西群[1] 

机构地区：[1]西北有色金属研究院,陕西西安710016 [2]北京大学,北京100871

出　　处：《功能材料》2007年第A08期3126-3129,共4页Journal of Functional Materials

基　　金：国家重大基础研究发展计划（973计划）资助项目（2005CB623900）

摘　　要：采用弯曲和循环拉伸实验研究了新型Ti-3Zr-2Sn-3Mo-15Nb（TLM）钛合金的形状记忆和超弹性特性，探讨了变形温度、总应变和热处理对TLM钛合金形状记忆和超弹性的影响规律。实验结果表明新合金在热轧态和在α＋β两相区固溶处理后比从β单相区固溶处理后具有较高的形变恢复率，最大可恢复应变可达1．8％．随着总变形应变增加，形变恢复率降低。从β相区固溶处理后TLM合金具有较好的超弹性，优于热轧态或时效处理后TLM合金的超弹性能。The shape memory effect and superelasticity of Ti-3Zr-2Sn-3Mo-15Nb （TLM） alloy were studied by bending test and tensile loading-unloading test. The effects of deformation temperature, total deformation strain and heat treatment condition on shape memory effect and superelasticity were investigated. The results of bending indicate that specimens hot rolled or cooled from α＋β dual phase region have higher shape recovery ratio than that cooled from β single phase region. The maximum completely recovery strain reaches 1.8. The shape recovery ratio decreases with the increase of the total deformation strain which has been proved in many other beta titanium alloys. The TLM alloy specimen cooled from β single phase region in air exhibits a better superelasticity compared with that in hot rolling and aging conditions.

关 键 词：形状记忆效应 超弹性 Β型钛合金 Ti3Zr2Sn3Mo15Nb 

分 类 号：TG146.23[一般工业技术—材料科学与工程] TG113.25[金属学及工艺—金属材料]