基于传输块的暂态稳定建模  

Transient Stability Modeling Based on the Transfer-block Representation

作　　者：王克文[1] 王信杰[1] 谢志棠[2] 

机构地区：[1]郑州大学电气工程学院,郑州450001 [2]香港理工大学电机工程系

出　　处：《电力系统及其自动化学报》2007年第6期18-23,共6页Proceedings of the CSU-EPSA

基　　金：国家自然科学基金资助项目(50177028)

摘　　要：针对暂态稳定分析中发电机和相关控制系统的具体特点,将传输模块划分为大量的线性和少量的非线性表达。利用小干扰稳定分析中的插入式建模技术处理线性部分,先将发电机及辅助控制设备转化为两类基本的传输块,形成相应的数学表达,结合网络方程构成全系统计算模型。与常规的方法相比,在发电机建模、模型修改和状态变量的初值计算方面更为方便。该方法的有效性在一22节点6机系统上进行了验证。In view of the particular characteristics of generator and related control system models in the transient stability analysis, transfer modules are divided into a large number of linear equations and a small amount of non-linear equations. Linear modules are treated by the plug-in modeling technique which is used in the small signal stability analysis. With generators and related control equipment presented by two types of basic transfer blocks, corresponding mathematical models are established. With network equation considered, the computation model of entire system is then formed. Compared with the conventional modeling approaches, the proposed method is convenient in generator modeling, module modification and the computation of state variable initial values. The proposed technique is validated on a 22-bus 6-generator test system.

关 键 词：暂态稳定 状态变量 建模 

分 类 号：TM712[电气工程—电力系统及自动化]