轴类件的柔性辊轧成形工艺与实验研究  

The research on the process of flexible rolling for shaft forgings and experiment

作　　者：徐春国[1] 任广升[1] 袁相勇[1] 刘桂华[1] 沈智[1] 蒋智[1] 

机构地区：[1]北京机电研究所,北京100083

出　　处：《塑性工程学报》2008年第2期100-104,共5页Journal of Plasticity Engineering

基　　金：国家自然科学基金资助项目(50205003;50675014);国家科技支撑计划资助项目(2006BAF04B03)。

摘　　要：柔性辊轧成形是成形轴类件的有效方法之一,具有柔性、快捷和低成本的特点,文章简要介绍了该工艺的成形原理和主要工艺参数,制作了实验装置,采用实验方法进行了实际轧制实验,应用电测法测量了轧制力能参数,结合理论计算分析力能参数与工艺参数间的关系,分析结果为成形设备的开发打下了理论基础。The flexible rolling was one of good forming methods for shaft forgings part with many advantages such as flexibility, quick and lower cost. The paper mainly introduced the process forming principle and main forming parameters. The experiment set was developed and the forming rolling was done on the experiment set. The forming load was tested with electrical measurement, the relation between load and main parameters were obtained, all the result was helpful for the further development on the forming equipment.

关 键 词：轴类件 柔性辊轧 工艺参数 力能参数 

分 类 号：TG331[金属学及工艺—金属压力加工]