高温合金激光表面熔铸涂层组织与性能的研究  

Study on Microstructure and Properties of Coating on High Temperature Alloy by Laser Surface Melt Casting

作　　者：刘其斌[1,2] 陈江[1,2] 王丽[1,2] 雷华 于杰[1,2] 

机构地区：[1]贵州工业大学 [2]中国科学院腐蚀与防护研究所

出　　处：《金属热处理学报》1997年第2期51-56,共6页

基　　金：贵州省科委基金

摘　　要：研究了高温铸造镍基合金ＧＨ３３激光表面熔铸镍基合金涂层的组织与性能。结果表明，基体对涂层合金的稀释较小，涂层与基体之间形成良好的冶金结合；Ｘ射线衍射分析表明，涂层基体组织为γＮｉ枝晶，枝晶间为γＮｉ、Ｍ２３（ＣＢ）６、Ｎｉ３Ｂ、Ｃｒ２Ｂ、ＣｒＢ、ＷＣ。涂层显微硬度分布均匀，涂层耐磨性能较基体高１０倍以上。通过组织与性能的综合评价，得出了激光熔铸涂层的最佳工艺参数。In the present paper,the microstructure and properties of Ni based alloy coating on the high temperature Ni based cast alloy GH33 by laser surface melt casting had been studied.The experimental results showed that the substrate had a small dilution to coating alloy,and the excellently metallurgical bonding was formed between coating and substrate.The results of X ray diffraction indicated that the essential phase was γ Ni dendrite,and there also were other phases such as γ Ni,M 23 (CB) 6,Ni 3B,Cr 2B,CrB and WC in the coating.The distribution of microhardness in coating was homogeneous.The wear resistance of coating was accelarated ten times than that of substrate.The best technological parameters of laser surface melt casting were obtained through comprehensive analysis of structure and properties.

关 键 词：高温合金 熔铸层 激光熔铸 表面处理 

分 类 号：TG174.44[金属学及工艺—金属表面处理] TN241[金属学及工艺—金属学]