硅烷偶联剂对纳米羟基磷灰石表面改性的研究  

Surface Modification of Nano-Hydroxyapatite with Silane Agent

作　　者：廖建国[1] 王学江[1] 左奕[1] 张利[1] 文季秋[1] 李玉宝[1] 

机构地区：[1]四川大学分析测试中心,纳米生物材料研究中心,成都610064

出　　处：《无机材料学报》2008年第1期145-149,共5页Journal of Inorganic Materials

基　　金：国家“973”中荷战略科学联盟计划项目(2004CB720604)

摘　　要：采用硅烷偶联剂(KH-560)对纳米羟基磷灰石(n-HA)表面进行处理,并研究了n-HA与KH-560的界面作用.傅立叶红外光谱(FT-IR)以及X光电子能谱(XPS)分析表明,偶联剂在羟基磷灰石表面黏附,其中硅羟基(Si-OH)与磷酸氢根(HPO_4^(2-))基团之间脱水形成稳定的Si-O-P化学键,此外,硅羟基与HA表面-OH间亦脱水形成化学键合.偶联处理的HA与聚碳酸酯(PC)复合后,复合材料的力学强度与未经处理的相比有明显提高.扫描电子显微镜(SEM)结果显示,经处理后的HA微粒在PC中分散均匀,两者间结合紧密,表明无机有机复合材料间良好的界面作用是提高复合材料力学强度的重要途径.Nano-hydroxyapatite （n-HA） was modified by using silane coupling reagent （KH-560）, and the interfacial interactions between n-HA and KH-560 was also studied. Fourier transform infrared spec- tra （FT-IR） and X-ray photoelectron spectra （XPS） analyses show that the silane coupling molecular binds strongly to n-HA surface. Chemical bonding （Si O-P） is formed by the reaction between Si-OH and HPO4^2- group, and a similar interface effect exists between Si-OH and the hydroxyl group of HA. Surface modification of HA particles can improve the mechanical strength of the n-HA/polycarbonate （n-HA/PC） composites dramatically. SEM observation shows that modified HA particles uniformly dis- tribute in the PC matrix. The results indicate that the interfacial interaction between surface-modified inorganic particles and polymer matrix is crucial for the improvement of the mechanical strength of the composites.

关 键 词：纳米羟基磷灰石 硅烷偶联剂 聚碳酸酯 复合材料 表面改性 

分 类 号：R318[医药卫生—生物医学工程]