检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘广成[1] 王春涛[2] 葛红卫[1] 肖学章[1] 罗翔[1] 王新华[1] 陈立新[1]
机构地区:[1]浙江大学材料科学与工程学系,杭州310027 [2]浙江海洋学院机电工程学院,舟山316004
出 处:《西安交通大学学报》2008年第1期119-122,共4页Journal of Xi'an Jiaotong University
基 金:国家高技术研究发展计划资助项目(2006AA05Z144);国家重点基础研究发展规划资助项目(2007CB209700);浙江省重大科技专项基金资助项目(2006C11233)
摘 要:采用高能机械球磨法制备了Mg+10%TiFe1-xCk(x=0,0.3)复相储氢合金,对比研究了球磨复相合金和球磨纯镁的微结构与储氢性能.研究结果表明:在纯Mg中添加质量分数为10%的TiFe1-xCk(x=0,0.3)进行复合球磨,可以明显提高其吸放氢性能;在相同温度条件下,x=0.3的含铬复相舍金具有最佳的吸放氢性能,其中在613K下的吸氢容量(氢的质量分数)为7.14%,放氢容量(氢的质量分数)为6.91%;在493~573K的较低温度下,含铬复相合金表现出更好的放氢动力学性能.通过XRD、SEM、EDS分析研究表明,TiFe1-xCrx(x=0,0.3)合金粉以细小颗粒的形式分散镶嵌在镁粉基体上成为催化活性点,改善了体系的吸放氢性能.Mg+ 10% TiFe1-x Crx (x = 0, 0.3) multi-phase alloys and pure magnesium were composed by high energy mechanical milling, and their hydrogen storage characteristics were investigated comparatively. The result shows that the hydrogen storage properties increase remarkably after pure magnesium ball-milled with 10 % TiFe1-x Crx (x = 0, 0.3). Moreover, the" chromium content also influences the hydrogen storage characteristics. Furthermore, the ball-milled com- posite of Mg+10%TiFe0.TCr0.3 has the best hydrogen storage properties with hydrogenation capacity (mass fraction) of 7. 14 % and dehydrogenation capacity of 6.91% at 613 K. In addition, at the lower temperature of 493 - 573 K, the Cr-contained composite exhibits the best dehydrogenating kinetics. The analysis with X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometer (EDS) indicates that the fine TiFe1-xCrx particles distribute on the surface of magnesium base, acting as some catalysis sites, which improves the hydrogenating and dehydrogenating properties.
分 类 号:TG139.7[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249