高压阳极含锡铝箔再结晶织构的EBSD分析  

EBSD micro-orientation analysis on recrystallization texture of high voltage anode aluminum foil containing trace-Tin

作　　者：宋婧波[1] 毛卫民[1] 孟利[1] 杨宏[1] 冯惠平[1] 

机构地区：[1]北京科技大学材料学系,北京100083

出　　处：《中国体视学与图像分析》2007年第4期258-262,共5页Chinese Journal of Stereology and Image Analysis

基　　金：国家自然科学基金(No.50571020);教育部博士点基金(No.20040008010)

摘　　要：应用EBSD技术和织构定量检测手段分析高纯铝箔成品退火的再结晶立方取向亚晶粒的长大行为,以及整体中晶粒尺寸和取向差的分布规律,研究了微量元素锡对铝箔再结晶立方织构的影响。结果表明:高纯铝箔的再结晶织构主要由立方织构及R织构组成,二者的相对强弱随锡含量有规律地变化。锡含量较低时立方取向亚结构形核及快速长大的优势不受到影响,锡作为代替铅的环保型微量元素可以确保高压阳极铝箔95%以上的立方织构占有率。锡含量过高时,非立方取向再结晶核获得更多的生长机会,长时间加热大尺寸非立方取向晶粒可通过吞噬立方取向亚晶粒发生异常长大,立方织构占有率明显下降。The growing behaviors of cube-oriented subgrains in high voltage anode aluminum foil during the recrystallization process, as well as the regulations of the grain size distribution and misorientation distribution, was investigated based on the quantitative texture analysis and EBSD micro-orientation analysis, while the influence of Sn content on the formation of cube texture was also discussed. It was shown that with decreasing Tin content cube texture in the foils increased, while R texture decreased. When Sn content was the relatively low, the obvious advantages of the formation of the cube-oriented subgrains and the following grain growth would not be weakened. Thus Sn can be assumed as an ecological element substituted for Pb to insure the high volume fraction of cube texture. The much higher content of Sn would provide more chances for the growth of non-cube oriented recystallization cores, and the annealing at 520℃ for very long time would induce an abnormal growth and reduce the cube texture component.

关 键 词：EBSD SN 立方织构 高压铝箔 

分 类 号：TG111[金属学及工艺—物理冶金]