铜含量对镁合金化学镀Ni-Cu-P镀层性能的研究  

The Study on the Effect of Different Copper Content on Electroless Ni-Cu-P Plating for Magnesium Alloy

作　　者：马壮[1] 王茺[1] 李智超[1] 

机构地区：[1]辽宁工程技术大学材料科学与工程系,辽宁阜新123000

出　　处：《表面技术》2008年第1期34-36,共3页Surface Technology

基　　金：辽宁省教育厅科学技术研究项目(20060375)

摘　　要：为研究镀液中不同铜离子含量对镁合金AZ91D化学镀Ni-Cu-P镀层性能的影响,采用硫酸镍为镍源,在镁合金化学镀Ni-P的镀液中加入不同含量的铜离子,可直接得到不同的Ni-Cu-P镀层,但都较均匀致密,结合力良好。经过耐醋酸腐蚀、磨粒磨损试验,结果表明:在硫酸铜含量为0.5g/L的镀液中获得的Ni-Cu-P镀层,较基体的耐蚀性提高了0.84倍,耐磨性提高了0.56倍。由此得出结论:镀液中硫酸铜含量为0.5g/L,所得到的镀层性能最佳。For study on different copper content on magnesium alloys AZ91D electroless planting Ni-Cu.P, using nickel sulfate as nickel resourse, adding different content copper ion to the bath of electroless Ni-P plating on magnesium alloys, the Ni-Cu-P plating coat can be obtained. The coating is uniform and dense and has good adhesion. The corrosion and wear test result shows that when the bath is 0.5 g/L CuSO4 the basal body may get Ni-Cu-P plating coat, the corrosion resistance can improve 5.08 to basal body, the wear resistance of Ni-Cu-P plating coat can improve 6.77. This conclusion is that when the content of cupric sulfate is 0.5 g / L in plating solution, the plating has the best effect.

关 键 词：镁合金 化学镀 NI-CU-P 耐磨性 耐蚀性 

分 类 号：TQ153[化学工程—电化学工业]