检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邹琪琳[1] 王利威[1] 庞盟[1] 屠东升[1] 张敏[1] 廖延彪[1]
出 处:《光子学报》2008年第1期77-81,共5页Acta Photonica Sinica
基 金:国家863高技术研究发展计划重大项目(2001AA602011-11)资助
摘 要:介绍了一种用于石油勘探的井下3维VSP(Vertical Seismic Profile)采集系统设计方案,实验验证该系统达到了可测量动态范围80dB(可测量最大值与最小之比),系统采集、处理和传输的总延时低于200ms(2kbit/s采样率)的指标,适用于井下VSP采集.系统采用六级光纤加速度传感器组成阵列,其中每级传感器由三个麦克尔逊干涉仪构成.使用高速DSP处理芯片实现相位产生载波(Phase Generated Carrier,PGC)解调等算法以获得地震波信号;同时应用多个ARM处理器设计光纤检波器阵列控制器以及阵列内部总线.A down-hole seismic survey system that can be applied in three dimensions vertical seismic profile (VSP) detection in petroleum exploration is demonstrated. The results of experiments show that the system has a dynamic measurement range of 80dB (ratio of maximum to minimum value) and the total delay for signal collection,process and communication is less than 200ms @ 2k bit sample rates. An array consisting of six fiber-optic accelerometers (receivers) is applied in this system. Each receiver is comprised of three fiber-optic Michelson interferometers. High-speed DSP chips are employed to realize the PGC demodulation and other algorithms to obtain the seismic information. Multi-ARM CPUs are introduced into the system to design the fiber-optic accelerometer array controller and the receiver array local bus. The design and experiments of the system are given in this paper in detail.
关 键 词:光纤传感 3维VSP光纤检波器阵列 麦克尔逊干涉仪 相位产生载波 阵列内部总线
分 类 号:TP212.14[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.220.129.249