高速CO_2焊接过程稳定性分析  

Analysis of welding process stability in high speed CO_2 arc welding

作　　者：李海洲[1] 陈焕明[1] 汪有韬[1] 

机构地区：[1]南昌航空大学,江西南昌330063

出　　处：《南昌航空大学学报（自然科学版）》2007年第2期80-83,共4页Journal of Nanchang Hangkong University(Natural Sciences)

基　　金：南昌航空大学研究生创新基金资助项目(YC2006005);江西省教育厅科技项目(2006-171)

摘　　要：利用汉诺威焊接质量分析仪,检测CO2焊短路过渡过程的电参数信号,研究高速焊接情况下燃弧时间与短路过渡周期的变化规律,分析了高速CO2焊接过程中短路过渡各个电参数对焊接过程稳定性的影响。对短路与燃弧阶段的电流、电压波形进行分析,认为波形控制可以有效改善焊接过程的稳定性。The electrical parameters of the short circuit transfer process in CO2 arc welding were measured by means of welding quality analyzer of Hannover.The regular of the arc-time and short-circuiting transfer cycle time was investigated under the high speed welding.The influence of the short-circuit transfer parameters on the welding process stability in high speed CO2 welding were analyzed.Through research of current and voltage waveforms in short-circuit period and arc period,the results show that the current waveform control is an effective method to improve stability of welding process.

关 键 词：高速焊 CO2焊 短路过渡 

分 类 号：TG403[金属学及工艺—焊接]