新型聚季铵盐的合成、表征及其性能测试  

Synthesis and characterized of new quaternary ammonium polymers and its function test

作　　者：王瑛[1] 孙立伟[1] 王萍[1] 严莲荷[1] 

机构地区：[1]南京理工大学化工学院,江苏南京210094

出　　处：《应用化工》2008年第2期149-152,共4页Applied Chemical Industry

基　　金：江苏省社会发展基金资助项目(BS2002043)

摘　　要：以二氯乙醚和N,N,N’,N’-四甲基乙二胺为原料,通过共聚合反应制备出新型的水溶性聚季铵盐——聚[(氧亚乙基-二甲基亚氨基-亚乙基-二甲基亚氨基-亚乙基)二氯化物]。研究表明,最佳合成工艺条件为:四甲基乙二胺和二氯乙醚的摩尔配比为1.05∶1,反应温度控制在70℃,反应时间为6 h,滴加速度为30滴/min。采用红外、核磁共振对产物进行结构表征;测定了聚合物的热稳定性,特征粘数等;初步测试了该聚季铵盐的杀菌性能;杀菌时间9 h,药剂投加量为80 mg/L时杀菌效果最好,杀菌率达到98%;产物最大特征粘数为15.231 3 mL/g。Through copolymerization using N, N, N ＇, N＇ -tetramethylenediamine and bis （ 2-chloroethyl ） ether as raw materials, a new kind of water-soluble quaternary ammonium was prepared through polymerization reaction： poly[ oxyethylene-（dimethyliminio） ethylene- （dimethyliminio） ethylenedichloride ]. The study indicate：the best synthetic condition when the material proportion of bis（2-chloroethyl） ether and N,N,N＇ ,N＇-tetamethylenediamine is 1：1.05 ,and the temperature of the reaction is 70℃ ,the time of the reaction is 6 h, rate of drop is 30 dorp/min. Analytical method such as FI＇-IR and NMR was used to confirm the structures of polymer. And quaternary polymer＇ s antibacterial activities were studied. Bactericidal efficiency of 9 h is up to 98% when the viscosity is 80 mg/L. The product characteristics of viscosity is 15. 231 3 mg/L.

关 键 词：聚季铵盐 合成 特征粘数 杀菌性能 

分 类 号：TQ126.25[化学工程—无机化工]