检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:苏江滨[1] 孟焘[1] 李论雄[1] 王占国[2] 朱贤方[1]
机构地区:[1]厦门大学中国-澳大利亚联合功能纳米材料实验室和厦门大学物理系,厦门361005 [2]中国科学院半导体研究所半导体材料科学重点实验室,北京100083
出 处:《功能材料与器件学报》2008年第1期268-272,共5页Journal of Functional Materials and Devices
基 金:国家自然科学基金资助项目(No.90401022No.90406024);国家教育部科技重点资助项目(No.105099);中澳科技合作特别基金资助项目(No.20050222);福建省科技项目(No.2005HZ1019);厦门市科技局资助项目(No.3502Z20055010)
摘 要:利用透射电镜(TEM)原位观察了一端固定一端自由和两端固定的单壁碳纳米管(SWNT(s))在电子束辐照下的结构不稳定性。研究发现,一端固定一端自由的SWNT优先轴向和径向收缩后颈缩,最后形成一个个碳笼紧密相连的收缩结构("碳笼-碳笼"结构);两端固定的SWNT仅径向收缩后颈缩,最后形成许多碳笼相连的类似结构。此外,后者在电子束辐照下断开后又会重新粘合起来,表现出很强的表面塑性流变或湿润效应。这些电子束辐照诱导SWNTs非热激活结构不稳定性现象可以用我们最近提出的表面纳米曲率效应和能量束超快诱导软模和点阵失稳进行全新、全面、正确的解释。Structural instabilities of single - walled carbon nanotubes (SWNTs) of two typical settings, which are respectively fixed at only one end and at both ends, were investigated under electron beam irradiation by our developed in - situ transmission electron microscopy observation technique. It was observed that the tube fixed only at one end preferentially shrunk in axis direction first, then shrunk and necked in diameter, and finally formed a carbon cage -like strand structure at the tube free end whereas the tube fixed at both ends merely shrunk and necked in diameter with the similar formation of carbon cage - like strand structure. It is especially intriguing that the necked carbon cage - like strand structure in the latter case was able to re -fuse after breaking and thus demonstrated a strong wetting ability and an amazing athermal plastic flow on the surface of the SWNT fixed at both ends under the electron beam irradiation at room temperature. The above athermal structural instabilities of SWNTs as induced by electron beam irradiation can be well accounted for by the completely new concepts of the surface nanocurvature and ultrafast energetic beaminduced soft mode and lattice instability as we recently proposed.
关 键 词:单壁碳纳米管 电子束辐照 结构不稳定性 表面纳米曲率效应 能量束超快诱导软模和点阵失稳
分 类 号:TB383[一般工业技术—材料科学与工程] S152.47[农业科学—土壤学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.127