圆织机变径结构与控制  

Structure and Control of Change Caliber for Round Loom

作　　者：张博[1] 严中清[1] 胡翔[1] 曾云翔[1] 

机构地区：[1]中国兵器工业第五八研究所自动化工程技术部,四川绵阳621000

出　　处：《兵工自动化》2008年第2期63-64,共2页Ordnance Industry Automation

摘　　要：圆织机变径过程可通过控制上下汽缸交替动作和复位实现,其硬件需采用计数磁感应传感器等电子器件配合控制系统。变径过程的监控主要是刀口直径的检测和控制。织带过程中,刀口的直径即爆炸带在该段的直径,若不进行检测和控制会造成废品的产生。由于刀口直径的改变由变径时五星轮的拨齿产生,故可通过对变径时五星轮拨齿个数的检测和控制,间接实现刀口直径的检测和控制。The round loom change caliber can be realized by controlling up and down cylinder alternation and replacement. Its hardware adopts electronic components such as count magnetic induction sensor in control system. The change caliber monitoring mainly includes detecting and controlling for blade diameter. When equipment weaves strip, the blade diameter is the blasting area diameter on this strip. If there is no detecting and controlling, the equipment will create failed products. The blade diameter changing will be realized by five-star tine in changing caliber. Then, indirectly realize the blade diameter detection and control by detecting and controlling, of tines.

关 键 词：圆织机 变径机构 变径控制与检测 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置]