硫化剂TCY/硫黄并用硫化体系对ACM性能的影响  

Influence of TCY/sulfur curing system on properties of ACM

作　　者：潘啟聪[1] 罗权焜[1] 

机构地区：[1]华南理工大学材料科学与工程学院,广东广州510640

出　　处：《橡胶工业》2008年第3期138-141,共4页China Rubber Industry

摘　　要：研究硫化剂TCY/硫黄并用硫化体系对丙烯酸酯橡胶(ACM)性能的影响。结果表明,硫化剂TCY和硫黄用量对ACM硫化胶的耐油性能影响不大;当硫化剂TCY用量为1.5份、硫黄用量为0.3份时,ACM胶料的硫化速度较快,硫化胶各项性能较好,特别是耐热空气老化性能优异。The influence of TCY/sulfur curing system on the properties of ACM was investigated. The results showed that the addition level of TCY and sulfur had little effect on the oil resistance of ACM;when 1.5 phr TCY and 0.3 phr sulfur were used, an ACM compound with higher curing rate was obtained,and its vulcanizate possessed better comprehensive properties, especially, excellent thermal aging property.

关 键 词：硫化剂TCY 硫黄 丙烯酸酯橡胶 热空气老化性能 

分 类 号：TQ330.3[化学工程—橡胶工业]