Fluorescent Labeling of Nanometer Hydroxyapatite  

作　　者：Yuan ZHANG Yuan YUAN Changsheng LIU 

机构地区：[1]Key Laboratory for Ultrafine Materials of Ministry of Education, and Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China

出　　处：《Journal of Materials Science & Technology》2008年第2期187-191,共5页材料科学技术（英文版）

基　　金：appreciate the financial support from the National Natural Science Foundation of China(No.20425621);the Major State Basic Research Program of China(No.2005CCA01000);the Basic Research Foundation of Shanghai Science and Technique Committee(No.05DJ14005).

摘　　要：A novel surface treatment method using 3-aminopropyltriethoxysilane （AMPTES）, was developed to immobilize the fluorescein molecule on nano-HAP （nanometer hydroxyapatite） powders. By pretreating the nano-HAP powders surface with AMPTES, fluorescein, chosen on the basis of the chemical structure of the nano- HAP powders, could be bound to the nano-HAP powders surface. The chemical compositions of nano-HAP before and after being labeled were characterized by Fourier transform infrared spectroscopy （FTIR） and X-ray photoelectron spectroscopy （XPS）. The morphology, phase composition, and the fluorescence characteristics of the nano-HAP powders with and without staining were also investigated. The FTIR and XPS results revealed that fluorescein had been successfully immobilized on the surface of AMPTES-bound nano-HAP powders via the acylamide bond formation between the -COOH of fluorescein and the -NH2 of AMPTES. The labeled nano-HAP powders possessed strong fluorescent intensity with a little deviation from the maximum emission wavelength of fluorescein. But the morphology and phase composition had no obvious alteration. Under fluorescence microscopy, the labeled nano-HAP powders, even after 24 h cell incubation, exhibited strong fluorescence.A novel surface treatment method using 3-aminopropyltriethoxysilane （AMPTES）, was developed to immobilize the fluorescein molecule on nano-HAP （nanometer hydroxyapatite） powders. By pretreating the nano-HAP powders surface with AMPTES, fluorescein, chosen on the basis of the chemical structure of the nano- HAP powders, could be bound to the nano-HAP powders surface. The chemical compositions of nano-HAP before and after being labeled were characterized by Fourier transform infrared spectroscopy （FTIR） and X-ray photoelectron spectroscopy （XPS）. The morphology, phase composition, and the fluorescence characteristics of the nano-HAP powders with and without staining were also investigated. The FTIR and XPS results revealed that fluorescein had been successfully immobilized on the surface of AMPTES-bound nano-HAP powders via the acylamide bond formation between the -COOH of fluorescein and the -NH2 of AMPTES. The labeled nano-HAP powders possessed strong fluorescent intensity with a little deviation from the maximum emission wavelength of fluorescein. But the morphology and phase composition had no obvious alteration. Under fluorescence microscopy, the labeled nano-HAP powders, even after 24 h cell incubation, exhibited strong fluorescence.

关 键 词：Nano-HAP FLUORESCEIN Silane coupling agent Fluorescent intensity 

分 类 号：TB383[一般工业技术—材料科学与工程]