铸造不锈钢铣削力的实验研究  

Experimental study on milling force of cast stainless steel

作　　者：张燕[1] 李书环[2] 李艳聪[2] 阎兵[1] 

机构地区：[1]天津工程师范学院机械工程系,天津300222 [2]天津农学院机电工程系,天津300384

出　　处：《天津工程师范学院学报》2008年第1期37-39,54,共4页Journal of Tianji University of Technology and Education

基　　金：天津市自然科学基金资助项目(043603111)

摘　　要：采用多因素正交试验法进行了不锈钢倾斜面的球头铣削试验;通过测力系统测量铣削力,用线性回归方法对实验数据进行分析,得出铣削力经验公式,并验证了公式在实验参数范围内的有效性。同时,分析了不同铣削参数对铣削力的影响规律,分析结果对铣削参数的优化具有一定的参考价值。The milling test for stainless steel ramp is carried out with the multi-factors orthogonal test method. With the force measuring system, the milling force is measured, and the experiential formula for calculating milling force is obtained with the method of linearity regression. Within the range of experiential parameter the formula＇ s validity is validated.The changing rule of cutting force changing with cutting parameters is analyzed and all these have helped to optimize the cutting parameters.

关 键 词：铸造不锈铜 铣削力 铣削参数 

分 类 号：TG506.71[金属学及工艺—金属切削加工及机床]