铁氧化合物对多孔陶瓷滤料表面改性的研究  

Study on Surface Modification of Porous Ceramics Filter Media by Iron Oxide Compound

作　　者：李方文[1] 吴建锋[1] 徐晓虹[1] 马淞江[2] 吴小爱[2] 

机构地区：[1]武汉理工大学材料科学与工程学院,湖北武汉430070 [2]湖南科技大学化学化工学院,湖南湘潭411201

出　　处：《湖南科技大学学报（自然科学版）》2008年第1期117-120,共4页Journal of Hunan University of Science And Technology：Natural Science Edition

基　　金：湖南省自然科学基金资助项目(06JJ4005)

摘　　要：通过液相沉积、多次涂层法研究了陶瓷滤料的改性.用均匀试验设计方法优化了改性工艺,并对改性滤料的铁覆盖量、抗酸碱和抗机械耐磨性能、比表面积、表面形貌和铁氧粉末的物相组成进行了表征分析.结果表明,2号样品改性工艺为最佳,其比表面积、铁覆盖量、抗酸碱和抗机械耐磨铁脱落率最大或最少,分别为4.987 m2/g、12.181 2 mg/g、0.016 22%、0.015 09%、0.230 7%,铁涂层的主晶相为α-Fe2O3,为多孔结构.改性滤料的这些特性为增强其除污能力奠定了基础.图5,表1,参8.Modification of ceramics filter media was investigated by liquid phase depositing and coating many times, Modifying process was optimized with homogenous experimental design, and iron overlay quantity, anti-acid, anti-alkali, anti-mechanical wear resistant, special surface area; surface morphology and phase composition of iron oxide powder were characterized and analyzed. The results show that the modified process of sample two is optimal, and its special surface area, iron overlay quantity and iron-fall-off rate of anti-acid, anti-alkali, anti-mechanical wear resistant are most or least which are 4.987m^2/g, 12.1812mg/g, 0.01622%, 0.01509% and 0.2307%. The major crystalline phase of iron coat is a-Fe203 which takes on porous framework. Owing to these characteristics, performance of pollutants removal of modified filter media will be enhanced.

关 键 词：铁氧化合物 多孔陶瓷滤料 比表面积 铁覆盖量 涂层附着强度 孔径分布 

分 类 号：TQ028.7[化学工程]