双流体喷嘴雾化特性的试验研究  

Experimental Investigation on Atomizing Characteristics of Twin-fluid Nozzles

作　　者：卢平[1] 梁晓燕[2] 章名耀[3] 

机构地区：[1]南京师范大学动力工程学院,江苏南京210042 [2]国电南京自动化股份有限公司脱硫部,江苏南京210008 [3]东南大学洁净煤燃烧与发电技术教育部重点实验室,江苏南京210096

出　　处：《南京师范大学学报（工程技术版）》2008年第1期34-37,共4页Journal of Nanjing Normal University(Engineering and Technology Edition)

基　　金：江苏省普通高校自然科学研究计划(07KJD610119)资助项目

摘　　要：利用PIV测量技术,通过试验研究了两种双流体雾化喷嘴(气泡雾化喷嘴和Y型喷嘴)的雾化特性,分析了气液比、液体流量、喷嘴结构等对雾化性能的影响,研究结果表明:气泡雾化喷嘴的雾炬比双流体喷嘴更饱满,雾化质量更好;雾化颗粒平均粒径随着气液比增加呈现下降趋势,当ALR>0.04,雾化颗粒平均粒径减小的趋势趋缓;随着被雾化液体流量的增加,雾化颗粒平均减小;在相同混合室面积条件下,增大雾化气注入孔截面积有利于雾化质量的提高.Atomizing characteristics of two kinds of twin-fluid nozzles （effervescent nozzle and Y -type nozzle） are experimentally studied by using PIV technology ; the influences of nozzle type, air to liquid ratio （ ALR）, liquid flowrate, nozzle internal geometry, etc on atomizing properties are analyzed. The atomizing experimental results show that atomization quality of effervescent nozzle is better than that of Y - type nozzle under the same condition ; Sauter mean diameter （ SMD, D32 ） of atomized particles decreases with increasing of air to liquid ratio, the decreasing degree reaches stability at ALR 〉 0. 04; SMD of atomized particles decreases with increasing of liquid flowrate at the same air to liquid ratio; it will be helpful for atomization quality for effervescent nozzle to increase the injection area of atomization air in the same air infection area of internal mixture chamber.

关 键 词：雾化 双流体雾化 气泡雾化 喷嘴 气液比 

分 类 号：TK121[动力工程及工程热物理—工程热物理]