细直径型腔中灰铸铁铁液充型能力研究  

Study on Filling Capacity of Liquid Gray Iron in a Small Diameter Mould

作　　者：唐桢[1] 徐锦锋[1] 翟波[1] 

机构地区：[1]西安理工大学材料科学与工程学院,陕西西安710048

出　　处：《铸造》2008年第3期287-290,共4页Foundry

基　　金：西安市科技攻关计划(GG06069);西安市青年人才创业计划(2006)

摘　　要：结合Flemings提出的液态合金停止流动机理与凝固理论,建立了细直径型腔中灰铸铁铁液充型能力的计算模型。采用该模型理论预测了灰铸铁铁液的充型能力,并采用正交试验方法,研究了浇注温度、铸型温度、压头高度和型腔截面半径对铁液充型能力的影响规律。结果表明,新建理论模型能够较好地预测灰铸铁铁液在细直径型腔中的充型能力,预测结果与试验结果相吻合,发现影响充型能力的各因素的显著性由高到低依次为:型腔截面半径、浇注温度、压头高度、铸型温度。A filling capacity computing model of liquid gray iron in a small diameter mould was established by combining stoppage mechanism of liquid alloy flow with the solidification theory. The filling capacity of the liquid gray iron was predicted theoretically using this model. Orthogonal test method was applied to study the effect of some factors on the filling capacity of liquid gray iron. The results showed that the novel model can be used to predict the filling capacity of liquid iron in small diameter mould and the experimental data is in agreement with the theoretical analysis.It It is found that the sequence-based factors affecting filling capacity is radius of mould, pouring temperature, fall head and mould temperature.

关 键 词：细直径型腔 灰铸铁 充型能力 计算模型 

分 类 号：TG251[金属学及工艺—铸造]