Si_3N_4 陶瓷与灰铸铁配副的摩擦学性能  

Properties of Friction and Wear of Si 3N 4 Ceramics against Gray Cast Iron

作　　者：斯松华[1] 方亮[2] 高义民[2] 周庆德[2] 

机构地区：[1]华东冶金学院科研处科技开发部 [2]西安交通大学机械工程学院耐磨材料研究所

出　　处：《摩擦学学报》1997年第1期32-37,共6页Tribology

基　　金：国家自然科学基金;中国科学院兰州化学物理研究所固体润滑开放研究实验室基金

摘　　要：在Ｍ－２００磨损试验机上于无润滑、蒸馏水润滑、乳化液润滑和１０＃机械油润滑４种条件下，对Ｓｉ３Ｎ４陶瓷分别与灰铸铁ＨＴ和Ｔ８钢配副进行了摩擦磨损性能的对比试验研究．结果表明：Ｓｉ３Ｎ４陶瓷与灰铸铁ＨＴ配副时的摩擦因数和磨损体积在几种润滑环境中均表现出同样的顺序无润滑的＞蒸留水润滑的＞乳化液润滑的＞１０＃机械油润滑的；Ｓｉ３Ｎ４陶瓷与灰铸铁ＨＴ配副时在蒸馏水润滑下的摩擦因数仅为０．０２，而在乳化液润滑下的为０．１３；在无润滑和蒸馏水润滑下，铸铁中的石墨能起不同程度的固体润滑作用，而在乳化液或１０＃机械油润滑下，石墨的润滑作用得不到发挥，此时起润滑作用的分别是极性分子的化学吸附膜和油分子吸附膜．The friction and wear of ceramics Si 3N 4 against gray cast iron and 0.8% carbon steel under four lubricated conditions of dry friction,distilled water, emulsion and 10 # machinery oil have been studied in a ring block type wear tester. It is concluded that friction factor and wear are deceased in the order of dry friction,distilled water,emulsion and 10 # machine oil.Specially, friction factor is about 0.13 in emulsion and down to 0.02 in distilled water because the lubricating film containing graphite is formed on worn surface of gray cast iron in distilled water.The graphite can be taken as a solid lubricant in air and distilled water,but it can not in emulsion and oil.

关 键 词：灰铸铁 SI3N4陶瓷 磨擦学性能 

分 类 号：TQ174.758[化学工程—陶瓷工业] O313.5[化学工程—硅酸盐工业]