单片集成TFT-LCD手机驱动芯片内置稳压器的设计  

Design of Regulator for One-Chip Color TFT-LCD Driver Used for Mobile Phone

作　　者：陈升[1] 魏廷存[1] 樊晓桠[1] 

机构地区：[1]西北工业大学教育部嵌入式系统集成工程研究中心,陕西西安710072

出　　处：《液晶与显示》2008年第2期225-229,共5页Chinese Journal of Liquid Crystals and Displays

基　　金：国家"863"计划资助项目(No.2005AA121193);西安应用材料创新基金项目(No.XA-AM-200511)

摘　　要：研究并设计了一种用于单片集成TFT-LCD手机驱动芯片的稳压器电路,该电路产生恒定的直流电压(1.8V)给芯片内的逻辑控制电路和GRAM提供工作电源。在详细分析带隙基准电路和LDO电路的基础上,提出了一种负载调整率低、稳定性能好、温度系数小以及低功耗的稳压器电路解决方案。通过对采用0.18μm CMOS中压工艺设计的电路进行Hspice仿真表明,负载调整率为1.1%,负载电流突变时的稳定时间小于5μs,温度系数6.5ppm/℃,静态功耗小于0.04mW,均满足设计要求。The regulator block for one-chip TFT-LCD driver used for mobile phone was studied and designed, which is used to generate stable voltage （1.8V） as the power supply of logic control circuit and GRAM. Based on the detail analysis of bandgap reference circuit and LDO circuit, a total solution of regulator with low load regulation and good stabilization and small temperature coefficient and low power consumption was proposed. By Hspice simulation using 0. 18 μm CMOS middle-voltage process, it showed that the load regulation is 1.1 %, the stabilization time of output voltage variation suddenly varied with load current are less than 5 μs, temperature coefficient is only 6.5 ppm/℃ ,and the static power consumption is less than 0.04 mW, which are all satisfied with the specifications of one-chip TFT-LCD driver IC.

关 键 词：TFT-LCD 驱动芯片 带隙基准 LDO 

分 类 号：TN27[电子电信—物理电子学] TN710