检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王志兴[1] 李向群[1] 常晓燕[1] 郭华军[1] 彭文杰[1] 李新海[1] 陈启元[1]
机构地区:[1]中南大学冶金科学与工程学院,长沙410083
出 处:《中国有色金属学报》2008年第4期660-665,共6页The Chinese Journal of Nonferrous Metals
基 金:国家重点基础研究发展计划资助项目(2007CB613607)
摘 要:采用固相反应法合成掺碳锂离子电池正极材料LiMnPO4。利用XRD、SEM和充放电测试表征LiMnPO4的结构、形貌与充放电性能,并研究LiMnPO4电极的交流阻抗和锂离子的扩散行为。研究表明:适当提高合成温度与延长反应时间有利于促进晶体结构的完整,提高材料的放电平台和放电容量,改善电极反应表面电荷传递和材料中的锂离子扩散特性。在600℃烧结时间为24h的条件下可合成出一次颗粒大小为0.1-0.3μm的纯相LiMnPO4,样品容量达到95mA·h/g,充电态下锂离子的扩散速度为5.65x10^13cm^2/s。Carbon-containing LiMnPO4 was synthesized by solid-state reaction. The structure, surface morphology and charge-discharge performance of LiMnPO4 were characterized by X-ray diffractometry, scanning electron microscopy and electrochemical measurement respectively. The AC impedance and diffusion coefficient of lithium ion for LiMnPO4 were also studied, The results show that proper increase of temperature and sintering time improve the crystal structure, increase the discharge voltage plateau and capacity, and enhance the transfer of surface electrons and lithium ion diffusion, Good samples with pure phase and primary particle size of 0.1-0.3 μm can be prepared at 600 ℃ for 24 h. These samples possess capacity of 95 mA.h/g and lithium ion diffusion coefficient of 5.65 × 10^-13 cm^2/s,
分 类 号:TM912.2[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222