贵州高硫型铝土矿的最佳溶出条件分析  

Optimal Condition Analysis of Guizhou High-sulfur Bauxite Leaching Process

作　　者：何婷[1] 黎志英[2] 

机构地区：[1]贵州大学职业技术学院,贵阳550003 [2]贵州大学材料科学与冶金工程学院,贵阳550003

出　　处：《有色金属》2008年第2期68-70,共3页Nonferrous Metals

基　　金：国家自然科学基金资助项目(50264001)

摘　　要：通过对高硫型铝土矿多元素正交试验结果的极差和方差分析,研究氧化铝和硫溶出率与各因素之间的关系,确定溶出最佳条件。结果表明,温度260℃,碱浓度195g/L,石灰添加量12%,时间50min为溶出最佳条件。在此条件下,氧化铝溶出率不低于88%,硫的溶出率不高于13%。The relationship of the leaching rate of Al2O3 and sulfur from Bauxite with high-sulfur content from Guizhou of China with synthetic factors is investigated and the optimal leaching condition is determined by result analysis of multi-factors orthogonal experiments by variance and range. The optimal condition derived from the experimental data and the analysis is leacing-temperature 260℃, alkai-consistency 195g/L, CaO dosage 12 % and leaching-time 50min. In the optimum condition, the leaching rate of Al2O3 is not lower than 88 % and that the sulfur is not higher than 13 %.

关 键 词：冶金技术 高硫铝土矿 正交试验 数学模型 溶出最佳条件 

分 类 号：TF821[冶金工程—有色金属冶金] TF803.21