SrTiO_3纳米线的溶胶-凝胶模板法制备与表征  

Preparation and characterization of SrTiO_3 nanowires via sol-gel template method

作　　者：王巧玲[1] 

机构地区：[1]长沙环境保护职业技术学院环境工程系,湖南长沙410004

出　　处：《湖南农业大学学报（自然科学版）》2008年第2期245-248,共4页Journal of Hunan Agricultural University(Natural Sciences)

基　　金：湖南省科学技术厅项目(2007CK3057;2007FJ4136);湘财建指([2007]185);长沙环境保护职业技术学院项目(NYC0705)

摘　　要：采用二次阳极氧化法制备多孔阳极氧化铝(AAO)模板,通过溶胶-凝胶模板法在AAO模板的孔洞中制得SrTiO3纳米线,用XRD,EDS,SEM,TEM和SAED对纳米线的结构、成分和形貌进行表征.结果表明:AAO模板孔洞相互平行,孔径大小均一,所得纳米线长约13μm,直径约70nm,含有Al,O,Sr,Ti4种元素,为立方相多晶结构.Porous anodic aluminium oxide （AAO） template was fabricated by two-step anodization, and highly ordered SrTiO3 nanowires were prepared within the pores of AAO template via sol-gel template method. The structure, compositions and morphology of SrTiO3 nanowires obtained were characterized by X-ray diffraction（XRD）, energy dispersive spectroscopy （EDS）, scanning electron microscope （SEM）, transmission electron microscope （TEM） and selected area electronic diffraction （SAED）. The results show that the pores of the AAO template are parallel to each other with similar length of diameter containing four elements ： Al, O, Sr, Ti 4 . Moreover, the length and diameter of the nanowires are 13 μm and 70 nm, respectively. The prepared SrTiO3 nanowires belong to cubic system and polycrystalline structure.

关 键 词：钛酸锶 纳米线 多孔阳极氧化铝 溶胶-凝胶模板法 

分 类 号：O614.232[理学—无机化学]