增塑剂FS-200在载重子午线轮胎胎面胶中的应用  

Application of plasticizer FS-200 in tread of TBR tire

作　　者：江盛雯 李裕荣[1] 李代强[1] 沈春和[1] 

机构地区：[1]贵州轮胎股份有限公司,贵州贵阳550008

出　　处：《轮胎工业》2007年第4期219-221,共3页Tire Industry

摘　　要：试验研究国产增塑剂FS-200在载重子午线轮胎胎面胶中的应用,并与进口增塑剂A50P进行对比。结果表明,与增塑剂A50P相比,在胎面胶配方中加入增塑剂FS-200,对胶料加工性能、硫化胶物理性能和轮胎成品性能的影响基本相当,可大幅度降低原材料成本。The application of the domestic plasticizer FS-200 in the tread of TBR tire was experimentally investigated and compared to the imported plasticizer A50P. The results showed that the similar processibility of rubber compound,physical properties of vulcanizate and performance of finished tire were obtained by using plasticizer FS-200 instead of ASOP,but the material cost decreased significantly.

关 键 词：增塑剂 载重子午线轮胎 胎面胶 

分 类 号：TQ330.38[化学工程—橡胶工业]