Fe_3O_4纳米颗粒的制备及其LD_(50)测定  

Synthesis of Fe_3O_4 nano-particle and its determination of LD_(50)

作　　者：董晶莹[1] 刘宁[2] 

机构地区：[1]东北农业大学乳品科学教育部重点实验室,黑龙江哈尔滨150030 [2]东北农业大学食品学院

出　　处：《毒理学杂志》2008年第2期111-113,共3页Journal of Toxicology

基　　金：国家自然科学基金项目(30371055)

摘　　要：目的合成Fe3O4纳米颗粒,对经油酸钠改性前后的Fe3O4纳米颗粒进行小鼠的急性毒性实验。方法Fe3O4纳米颗粒的制备采用共沉淀法;表面改性处理采用油酸钠方法;纳米颗粒的表征分析采用X射线衍射分析仪(XRD)分析和透射电子显微镜分析方法;纳米颗粒的急性毒性实验采用急性毒性实验方法。结果在氮气的保护下制备温度取30～50℃之间,反应结束的pH取10～12之间,Fe2+/Fe3+=1∶2,铁盐的浓度为0.1mol/L,搅拌速度为2000r/min可以得到粒径为15nm的纳米颗粒。pH=5时,油酸钠的添加量为湿粉质量的20%,添加温度为80℃,得到乌黑发亮的粒径为15nm的改性纳米颗粒。结论改性前后的纳米颗粒对ICR小鼠的口服半数致死量LD50均大于3767mg/kg体重,对肝脏和肺脏有一定的影响。Objective This article focused on the preparation of Fe3O4 nano-particle by coprecipitation and its modification by sodium oleate. At the same time, its acute toxicity was evaluated by ICR mouse. Method Fe3O4 nano-particle preparation with together method of precipitation; Surface modification is handled with oleic acid sodium method; The nano-particle superficial characteristics analyses adopt XRD（ X-ray diffraction） analysis and the transmission electricity mirror analysis method; The test of acute toxicity should be done by the method of acute toxicity. Results The results indicated： The technical condition was that temperature was between 30℃ and 50℃ centigrade, final pH value was between 10 and 12, the ratio of Fe^2＋ and Fe^3＋ was 0.5, concentration of ferrite was 0.1 mol/L, stirring velocity was 2000 r/min. The size of obtained particles was 15 nm. Sodium Oleate, as a kind of anion surface active reagent, its modification condition was that pH value was 5, the quantity accounted for 20% of total waterish nano-particle power, the temperature was 80℃. Conclusion Modified and non-modified nano-particle was prepared colloid fluid and its LD50 was higher than 3 767.91 mg/kg orally on ICR mouse. Nano-particles was harmful to liver and lung to some extent.

关 键 词：FE3O4纳米颗粒 制备 改性 急性毒性 

分 类 号：R994.4[医药卫生—毒理学]