迷你摄像头夹板注塑模设计  

Design of the injection mould for the splint of mini camera

作　　者：李秀华[1] 吕伟[1] 刘震磊[1] 柴晓微[1] 

机构地区：[1]沈阳航空工业学院航空宇航学院,辽宁沈阳110136

出　　处：《模具技术》2008年第3期26-27,共2页Die and Mould Technology

摘　　要：通过对塑件的结构和成型工艺分析,确定了塑件的分型面和浇口结构,根据摄像头的成型工艺要求,阐述了模具设计的要点及其工作过程。该模具结构设计合理,生产的塑件质量符合设计和使用要求,对同类模具设计有一定的参考价值。The structure of the parting line and sprue was determined based on the analysis of the structure and forming technology of the plastic part. The structure of injection molding for the mini camera was designed according to the technological requirements. The design points of the mould and the working procedure were described. The mould can run accurately and smoothly and result is desirable, it could be certain references to the design of similar kinds.

关 键 词：迷你摄像头 注塑模 潜伏式浇口 工艺分析 

分 类 号：TG241[金属学及工艺—铸造]