共混型阻隔容器专用料配方及成型工艺的研究  

STUDY ON FORMULA AND BLOW MOULD TECHNOLOGY OF THE BLENDING SPECIAL MATERIAL FOR BARRIER CONTAINER

作　　者：邢文[1] 田稼薇[1] 周素[1] 刘建威[1] 许秋康[1] 季松 

机构地区：[1]扬子石化公司研究院,南京210048

出　　处：《现代塑料加工应用》1997年第6期1-5,共5页Modern Plastics Processing and Applications

摘　　要：将高密度聚乙烯(HDPE)、相容剂、尼龙以及其他助剂以适当配比干混后,在普通吹塑成型机上制得具有阻隔性能的中空制品。通过对制品阻隔性能、机械性能及制品剖面扫描电子显微照片的分析,研究了成型工艺、相容剂与尼龙的配混比例以及尼龙加入量对制品性能的影响。HDPE was blended with compatibilizer, nylon and other additives in proper ratio. The blend was made into a hollow container with good barrier property by common blow mould machine. The influences of mould technology, the compatibilizer/ nylon ratio,and the content of nylon on the barrier property, mechanical property and morphology were investigated.

关 键 词：高密度聚乙烯 共混 阻隔容器 成型 配方 聚乙烯 

分 类 号：TQ325.12[化学工程—合成树脂塑料工业] TQ320.6