300t起重吊钩的锻造成型工艺  

Forging Molding Technology of 300 T Lload Hook

作　　者：杨兵[1] 曲东方[1] 郭宝强[1] 

机构地区：[1]北方重工沈重集团有限责任公司锻造分公司,辽宁110025

出　　处：《大型铸锻件》2008年第3期15-17,共3页Heavy Casting and Forging

摘　　要：300t起重双钩锻造过程中摒弃了忽略横向料宽比瞬时参数的常规锻造方法,采取有效工艺措施,在坯料下面加垫块,将始末料宽比限制在0.8～1.4之间,从而得到了优质的吊钩。The conventional forging method of neglecting instantaneous factor of the materials width ratio in horizontal direction was replaced in the production process of double hooks of 300 t load crane . By adopting the effective technology of adding blocks under the blanks, and limiting the materials width ratio from beginning to the end between 0.8 - 1.4, high quality hooks would be achieved.

关 键 词：重型吊钩 锻件 砧宽比 料宽比 

分 类 号：TG314[金属学及工艺—金属压力加工]