一种基于多模式振荡器的低待机功耗AC/DC电路设计  

Design of a Low Stand by Power AC/DC Circuit Based on Multimode OSC

作　　者：刘毅[1] 张永铂[1] 朱樟明[1] 

机构地区：[1]西安电子科技大学微电子学院,西安710071

出　　处：《电子器件》2008年第3期868-870,874,共4页Chinese Journal of Electron Devices

基　　金：国家自然科学基金项目资助(60676009)

摘　　要：检测负载电源变化,得到Igreen;检测芯片电源变化,得到Iburst。利用这两个检测电流控制振荡器的振荡频率及截止时间,从而实现变频工作模式和间歇工作模式,两种工作模式的结合保证了大的动态范围,使空载状态下的功耗降低到60mW。采用1μm 40V CMOS工艺流片,芯片面积为2.7mm2。Igreen was obtained by monitoring load power; Igreen was obtained by monitoring chip power. These two current value was used for controlling the osc frequency and osc off-time. So the circuit working modes include frequency conversion mode and intermission mode, the working way guarantees a large dynamic range and makes the power consumption lower than 60 mW at zero-load. The layout was achieved by 1 μm 40 V CMOS processing technique and the chip area is 2.7 mm×2.7 mm.

关 键 词：截止时间调整 间歇模式 待机功耗 

分 类 号：TP274.2[自动化与计算机技术—检测技术与自动化装置]