冲压式打印机共轭凸轮机构的动力学分析与仿真  

Dynamic Analysis and Simulation of Conjugate Cam Mechanism in Punching Printer

作　　者：唐善华[1] 陈超[1] 张永林[1] 

机构地区：[1]武汉工业学院机械工程系,湖北武汉430023

出　　处：《轻工机械》2008年第3期27-29,共3页Light Industry Machinery

基　　金：湖北省自然科学基金计划项目资助(2006ABA269)

摘　　要：冲压式打印机用于香皂的最终成型打印,直动共轭凸轮机构是该机器的核心机构之一,该机构动态特性的好坏直接影响香皂成品的外观质量和整机的使用性能。针对此共轭凸轮机构在机器中的具体安装方式建立了动力学模型,并借助Matlab/Simulink仿真,仿真结果能直观地表明机构各参数对动态响应的影响。通过对仿真参数的修改,进行机构的参数优化,得出了该机构的动态设计结果。The punching printer is used for final finishing of soap, and the reciprocating-movement conjugate cam mechanism is the key part of the machine, its dynamic influences directly improves not only the appearance quality of soap but also the function of the whole machine. Dynamic model was set up based on the mechanism mentioned and simulating with Matlab/Simulink. We can directly observed all parameter＇ s influence on dynamic character with the help of simulating result. Through modifying the Simulation＇s parameters and optimizing the parameters of mechanism, the dynamic design result was obtained.

关 键 词：直动共轭凸轮机构 冲压式打印机 动力学分析 仿真 

分 类 号：TH112.2[机械工程—机械设计及理论]